 Marine-use Receivers
Copyright © Katech 2006
Designed by Rebecca Shalfield
|
 |
Marine-use Receiver Range - Details
AIS Sea Scope 1 (single channel)
AIS Sea Scope 2 (dual channel)
AIS Sea Scope Plus (dual channel)
AIS Sea Scope 1900 (dual channel)
Common Features
- Smart extruded aluminium enclosure with prominent KATAS logo.
- Wide input range, fully isolated dc power supply for correct and proper marine use.
- Proprietary two-way circular connector for input power supply.
- Proprietary circular connector for input/output and GPS power.
- Rear-mounted fully isolating on/off switch.
- Rear-panel fuse.
- Front-mounted red and green LEDs for indication of signal decoding status.
- SO-259 type aerial socket.
- Rear-panel earth terminal.
- Can be used with ShipPlotter PC charting software or choose from several other commercial packages.
Supplied With
- Rubber feet for free standing use.
- Brackets for upper or lower shelf or deckhead mounting.
- Serial port lead for computer and GPS receiver.
- Power supply lead, bare one end.
- No aerial supplied. A recommended marine aerial is Comrod type AV-7 available from distributors worldwide.
- Comprehensive printed user instruction manual.
- 12 month return to base warranty except where damage caused by lightning strike has occurred.
Optionally Supplied
- BNC socket to PL-259 aerial adapter for where aerial cable has BNC plug.
- N-type socket to PL-259 aerial adapter for where aerial cable has N-type plug.
|
